circlesm - 5/97 transformers & magnetic products industries inc. specifications are subject to change without notice rhombus 15801 chemical lane huntington beach, california 92649-1595 phone: (714) 898-0960 l fax: (714) 896-0971 38 surface mount inductors for use as a dual inductor, single inductor, or transformer. connect in series for high inductance values or wired in parallel for less inductance, but twice the current capacity. as a 1:1 transformer, they can provide a minimum of 500 volts isolation with good frequency response. these parts are manufactured using sendust material. lower cost versions of these products are available using powdered iron, however, there is an increase in core loss. toroid mount meets ul94vo designed for ir & vapor phase reflow processes custom designs available parallel operation: connect 1 & 4, 2 & 3 series operation: connect 2 & 4 schematic electrical specifications at 25 o c size "a " size "b " tape & reel available physical dimensions in inches (mm) footprints of contact surface area, not pcb layout --- parallel ratings --- --- series ratings - -- l dcr i l dcr i energy size part + 30% max. max. + 30% max. max. typ. code number ( m h ) ( m w ) adc ( m h ) ( m w ) adc ( m j ) l-15100 10 38 2.00 40 76 1.00 14 a l-15101 20 175 1.15 80 350 0.58 13 a l-15102 50 300 0.73 200 600 0.37 13 a l-15103 100 375 0.51 400 750 0.26 13 a L-15104 200 700 0.36 800 1400 0.18 13 a l-15105 10 40 2.50 40 80 1.25 26 a l-15106 20 103 1.60 80 206 0.80 26 a l-15107 50 180 1.02 200 360 0.51 26 a l-15108 82 320 0.73 328 640 0.37 26 a l-15109 100 375 0.73 400 750 0.37 26 a l-15110 300 625 0.42 1200 1250 0.21 26 a l-15111 10 38 3.00 40 76 1.50 32 b l-15112 20 100 1.50 80 200 0.75 23 b l-15113 50 350 0.95 200 700 0.48 23 b l-15114 100 375 0.67 400 750 0.34 23 b l-15115 300 720 0.39 1200 1440 0.20 23 b l-15116 10 29 4.00 40 58 2.00 55 b l-15117 20 50 2.10 80 100 1.05 45 b l-15118 50 90 1.35 200 180 0.68 45 b l-15119 100 175 0.95 400 350 0.48 45 b 1 2 4 3 2 1 3 4 2 1 3 4
|
